STEP 1) Mark your 4x4 at 3.5" intervals and cut out five pieces. Since a 4x4 is actually 3.5 inches, you’ll end up with five perfect cubes.
STEP 2) Sand the cube smooth on each side and round the corners. Using an actual dice or a photo for reference, mark where your dots should go on each side. Now you have a couple of options. You can drill, stain, paint, burn, or use any other method to get your dots. We’re going to drill a shallow hole at each point using a 5/8 inch forstner bit.
STEP 3) Next, we’ll stain the dice with Minwax Wood Finish. Once it dries we’ll finish by using a q-tip to paint the dots on with Rust-Oleum’s Ultra Cover paint.