|
|
|
|
Irwin Industr Tool
|
SDS Plus Hammer Drill Bit
Fits all SDS-plus and Hilti TE-C rotary hammers. Reduced area above the flute prevents the drill bit from binding while drilling. The full usable flute length can be utilized. Chrome vanadium shaft through-hardened to 50-53 HrC. Patented tip and flute design removes dust more efficiently, up to 25% faster than other bits. Shot-peened, double-tempered finish reduces breakage. Hot isostatically pressed to extend life and resist breakage. Copper braze material gives high heat-resistance for reduced tip loss. All tips made to ANSI specifications.No. 322002: 5/32" x 4" x 6"
No. 322004: 3/16" x 4" x 6"
No. 322005: 3/16" x 6" x 8"
No. 322007: 3/16" x 10" x 12"
No. 322016: 1/4" x 2" x 4"
No. 322017: 1/4" x 4" x 6"
No. 322018: 1/4" x 6" x 8"
No. 322020: 1/4" x 10" x 12"
No. 322022: 5/16" x 4" x 6"
No. 322024: 3/8" x 4" x 6"
No. 322025: 3/8" x 8" x 10"
No. 322026: 3/8" x 10" x 12"
No. 322029: 7/16" x 4" x 6"
No. 322031: 1/2" x 4" x 6"
No. 322032: 1/2" x 8" x 10"
No. 322033: 1/2" x 10" x 12"
No. 322036: 9/16" x 4" x 6"
No. 322037: 9/16" x 10" x 12"
No. 322041: 5/8" x 4" x 6"
No. 322042: 5/8" x 6" x 8"
No. 322043: 5/8" x 10" x 12"
No. 322047: 3/4" x 4" x 6"
No. 322048: 3/4" x 10" x 12"
No. 322052: 7/8" x 10" x 12"
No. 322054: 1" x 8" x 10"
View the manufacturer’s website for details and warranty information on this product. |
|
|
|
|
|